Same as the BV660H‐D but 930mm wide, contains a larger filter, two fans
Also single speed
The BenchVent BV930H‐D is a large ducted hood mounted local extraction cabinet designed specifically for laboratories
It is commonly used in dental & medical labs, pharmaceutical laboratories, research & development and school science laboratories
This unit exhausts air through a flexi‐duct externally to the atmosphere
Although, it's a ducted fume extractor, you don't need to have a special vent to use the BV930H‐D
Its flexi‐ducts can be fitted to a normal domestic vent or placed on a partially opened window
(We would recommend either one hole per duct or, if combining into on outlet, the outlet should be 150mm diameter)The BV930H‐D also provides operators with a safe workstation, as handling of all the potential harmful chemicals is done within the hood enclosure in front of the the intake filter area
For artwork applications, the enclosure can accommodate a standard A1 drawing boards, which will fit at an angle so the unit captures the over‐spray efficiently, keeping the surrounding working area clean
The BV930H‐D fume cabinet is designed for immediate operator protection
If outside venting isn't possible, BenchVent also offers re‐circulatory fume cabinets such as the BV660H‐C and BV930H‐C
Both units have higher filtration specifications
The BV930H‐D is suitable to filter fumes, vapours and particulates from:Spray Adhesives
Conformal coatings (thin polymer film usually used to coat circuit boards)
Paints
Monomers
Resin
Sealants
Solders
Light Grinding
Organic Solvents
Cleaners
Hazardous powders & particulatesWhat's included with the BV930H‐D?Filter unit with 2 x centrifugal fans
Hood Enclosure
Hood Light
Polycarbonate hinged front panel.2 x 2mtrs flexi‐duct ‐ 100mm diameter
Particulate filter
Power Lead
Data/Warranty BookletLifetime GuaranteeAll BenchVent filtration and extraction systems carry a lifetime guarantee
