The output voltage is selected by a rotary switch on the front of the unit, output is in 1V steps up to a maximum of 13V
It provides 0 ‐ 13V ac or unsmoothed dc in 1V steps at a maximum current of 8.5A
The ac and dc outputs may be used simultaneously, provided the combined output does not exceed 8.5A
Internal heavy duty relays allow the voltage to be switched without switch contact problem, ensuring long switch lifetime
The internal, quiet‐running fan will hardly be noticed but it reduces the already low thermal stress in the unit still further, ensuring long life of the instrument
Triple protection is provided by a resettable electronic overload trip, thermal transformer trip and slow‐blow fuse on the primary
Overloads are indicated by the LED changing from green to red
The mains cord is kept tidy, by means of the cable retainer on the back of the unit which allows the cable to be stowed away neatly with the use of winding hooks and a clip to secure the cable
The unit is recommended for general purpose laboratory work by teachers, technicians and students
Output voltage selected by rotary switch in 1V steps up to 13V
Long switch lifetime ‐ switch voltage safely at full load without switch contact arcing
Continuously rated output of 8.5A, a
c
or d
Sockets accept standard 4mm plugs and shrouded plugs
Snap up handle ‐ safe to carry with one hand
Internal fan for cool‐running under load
Fully protected secondary, by high speed, resettable electronic trip
Slow‐blow fuse protection for primary
Additional thermal trip protection for transformer
Compliant to EN61010‐2010 with certificates available on requestDimensions:Width: 175mm
